150 Ton Capacity Clearing O.B.I. Press
- Model: GM-150
- Capacity: 150 Tons
- Bed Area: 50″ x 30″
- Stroke: 12″
- Slide Adjustment: 7″
- Shut Height: 21″
- Speed: 40 SPM
Category Archives: Metal Working Machinery
Cross Model 55 Universal Gear Chamfering Machine For Sale
Cross Model 55 Universal Gear Chamfering Machine For Sale
- Year: 1984
- 220v 3phase
A pencil-point or a ball-point cutter rounds, points and chamfers gears to 18″ diameter, 10 to 80 teeth. Spur gears, helical and spline – both internal and external.
We’ve done our best to provide accurate information, however you may wish to verify any of the specifications.
1,800 Ton Capacity Schuler Straight Side Presses For Sale (2 Available)
1,800 Ton Capacity Schuler Straight Side Presses
- Model: SML4-1600
- Year: New in 2007
- Total Capacity: 1,800 US Tons (1,600 kN Tons)
- Bed & Slide Area: 3600mm x 2600mm
- Stroke: 1100mm
- Adjustment: 530mm
- Shut Height: 1440mm
- Speed: 8-20 SPM
- Note: 2 Available
160 Ton Capacity Stamtec Press For Sale
160 Ton Capacity Stamtec Press
- Model: G1-160-S
- Year: 1985
- Capacity: 160 Tons
- Stroke: 8″
- Slide Adjustment: 3.94″
- Shut Height: 17.7″
- Speed: 40 SPM
- Bed Area: 49″ x 31.5″
- Slide Area: 28″ x 21.5″
- Equipped With: Air Clutch and Brake, Air Counter Balances, Controls
Mori Seiki SL-250 CNC Lathe Turning Center For Sale
Mori Seiki SL-250 CNC Lathe Turning Center For Sale (model up from SL-200)
- Year: 1999
- Model: SL-250BSMC/500
- Run Time: 14,550 hours
- Swing Over Bed / Cross Slide: 26.8″/ 22.6″
- Maximum Turning Diameter: 15.3″
- Standard Turning Diameter: 8.27”
- Distance Between Centers: 22.6″
- Max Turning Length: 19.10″
- Spindle Speeds: 35-3500
- Spindle Motor: 20/15
- Spindle Nose: A2-8
- Min. Spindle Index Angle: .001”
- Spindle Bore: 3.3″
- Max Bar Size: 2.9″
- Turret Stations: 10
- Turret Index Time: 0.2 Sec
- Square Tool Capacity: 1″
- Boring Bar Capacity: 2.0″
- Axis Travel:
- Z- Axis: 19.5″
- X- Axis: 6.3″
- Live Milling: 10 Positions
- Live Milling RPM: 3,000RPM
- Live Milling HP: 8/5.8 HP
- Rapid Travels: X and Z : 708/944.9 IPM
- Tail Stock Taper: MT # 5
- Tail Stock Travel: 4.7”
- Machine Dimensions: 93.7″ x 69.3″ x 74.2″ high
- Power: 220v/3ph
Equipped With:
- MORI SEIKI-Fanuc MSC-501 (Fanuc 18i) CNC CONTROL
- RS-232C PORT INTERFACE FOR DNC OPERATION
- IN-MACHINE TOOL PRE-SETTER
- TAILSTOCK
- 20 HP SPINDLE
- STANDARD COOLANT SYSTEM WITH TANK & PUMP
- MAYFRAN CHIP CONVEYOR
- COLLET CHUCK INCLUDED (WITH SOME COLLETS)
Note:
- Does Not Include Bar Feeder
- Machine was recently removed from service on 2.10.17 and runs good
300 Ton Capacity Danly Straight Side Press For Sale
300 Ton Capacity Danly Straight Side Press For Sale – Used
- Model: SS2-300-72-42
- Serial #: 53065803
- Capacity: 300
- Bed Area: 72” x 42”
- Stroke: 8”
- Shut Height: 28.5”
- Slide Adjustment: 6
- Speed: 20-40 SPM
- Bolster Thickness: 7”
- Cushions: None
300 Ton Capacity USI Clearing Straight Side Press For Sale
300 Ton Capacity USI Clearing Straight Side Press For Sale – Used
- Model: S2-300-72-48
- Capacity: 300 Tons
- Bed Area: 72” x 48”
- Stroke: 16”
- Shut Height: 41”
- Slide Adjustment: 10”
- Speed: 30 SPM
- Bolster Thickness: 7”
- Cushions: None
300 Ton Capacity USI Clearing Straight Side Presses For Sale (Two Available)
300 Ton Capacity USI Clearing Straight Side Presses For Sale – Used
- Two Available
- Model: S2-300-84-48
- Capacity: 300 Tons
- Bed Area: 84” x 48”
- Stroke: 24”
- Shut Height: 41”
- Slide Adjustment: 10”
- Speed: 30 SPM
- Bolster Thickness: 7”
- Cushions: None
Used Hurco Hawk 40 SSM CNC Mill For Sale
Used Hurco Hawk 40 SSM CNC Mill For Sale – Used
- Model: HAWK40/SSM
- Year: 1999
- 3 Phase 230v
300 Ton Capacity Danly Straight Side Press For Sale
300 Ton Capacity Danly Straight Side Press For Sale – Used
- Stroke: 12″
- Shut Height: 36″
- Slide Adjustment: 6″
- SPM: 20-40
