Author Archives: Dev

Mazak Multiplex 620 – 6 Axis Twin Spindle

Posted on by
  • Max Swing Over Bed 15.35″
  • Bar Capacity 2″
  • Turning Diameter 10.24″
  • Spindle Nose A2-6
  • Spindle Thru Hole 2.55″
  • X Axis Travel 9.05″
  • Z Axis Travel, Left/Right Turret 16.92″/19.09″
  • Turret Positions 12 x 2
  • Rapid Traverse Speed 944.88 IPM
  • Swing 12.8″
  • Distance Between Spindles 46.45″
  • Turrets (2) 12 Position w/live milling
  • Power 25hp
  • Speed up to 3600 RPM
  • Weight 18,920lbs
  • Control Mazatrol EIA-TA CNC
  • These are the specifications to the best of our knowledge.  Please research and check specifications to ensure vital details of the machine.

Mazak Multiplex 620 pic 01 Mazak Multiplex 620 pic 02 Mazak Multiplex 620 pic 03 Mazak Multiplex 620 pic 04 Mazak Multiplex 620 pic 05 Mazak Multiplex 620 pic 06 Mazak Multiplex 620 pic 07 Mazak Multiplex 620 pic 08 Mazak Multiplex 620 pic 09

 

Mazak Multiplex 410 – Twin Spindle Dual Turret – Several Available

Posted on by
  • Control: Mazatrol EIA-TA
  • Chuck Size 6.5″ (2)
  • Max Diameter of Bar Capacity 1.65″
  • Distance Between Spindles 45.55″
  • Spindle Bore 2″
  • Spindle Nose A2-5
  • Rapid Traverse Rates 945IPM
  • X Axis Travel 7.87″
  • Z Axis Travel 14.37
  • Turret Index (single/full step) 0.4/1.2 Seconds
  • Maximum Swing: 13.78″
  • Turn Diameter: 9″
  • Machining Length: 15″
  • Bar Capacity: 1.65″
  • Spindle Speed: upto 3600 RPM
  • Main Motor: 15HP
  • Turret Position: (2) 12 Position
  • Machine Weight 15,400lbs
  • Several available, Years from 1991 to 1998
    • These are the specifications to the best of our knowledge.  Please research and check specifications to ensure vital details of the machine.

Mazak Multiplex 410 pic 17 Mazak Multiplex 410 pic 1 Mazak Multiplex 410 pic 2 Mazak Multiplex 410 pic 3 Mazak Multiplex 410 pic 4 Mazak Multiplex 410 pic 5 Mazak Multiplex 410 pic 6 Mazak Multiplex 410 pic 7 Mazak Multiplex 410 pic 8 Mazak Multiplex 410 pic 9 Mazak Multiplex 410 pic 10 Mazak Multiplex 410 pic 11 Mazak Multiplex 410 pic 12 Mazak Multiplex 410 pic 13 Mazak Multiplex 410 pic 14 Mazak Multiplex 410 pic 15 Mazak Multiplex 410 pic 16

 

Matthews Marking Machine – Can be used as Gun Marking Machine

Posted on by

Matthews Marking Machine

  • 4 1/2 Ton Indent-A-Mark Roll Marking Machine
  • Model 2094
  • Overall Size – 38.5″ H x 36″ W x 18″ D
  • Weight – 850lbs.
  • Electrical Requirements – 220/440 VAC, 3 PH, 60Hz
  • Motor – 7 HP
  • Pump – 3 GPM
  • Fluid Reservoir – 20 Gallon
  • Marking Force – 628 to 9000lbs.
  • Cross Slide – .5″ to 6″
  • Ram Stroke – .125″ to 1″
  • Throat Height (Ram Down/Head Down) 4.12″
  • Throat Height (Ram Up/Head Up) 17.88″
  • Marking Table – 22″ W x 8″ D
  • Cycle Rate
  • (1″ ram x 6″ cross slide stroke) – 36 cycles/min.
  • (1″ ram x 1″ cross slide stroke) – 86 cycles/min.
 Matthews Marking Machine 2