Aercology Portable Electrostatic Fume Mist Dust Collector EPP-1200 (Donaldson)

Posted on by Dev

Aercology (Donaldson) Electrostatic Dust Fume Mist Collector

EPP-1200

As you can see from the pictures, the arm tube has come apart and will need repair or replacement. Below are specifications we have pulled from the internet. You may want to double check the against factory info if need be.

Aercology Portable Electrostatic Precipitator.
EPP-1200
Serial 39939
Model EPP-1200
Nominal Capacity: 1200cfm
Voltage 1 phase/ 115 Volts / 13 Amps
Pickup velocity: 2200FPM
304 lbs +/-

AirFlow PAC-91 Portable Mist Fume Dust Collector

Posted on by Dev

AirFlow PAC-91 Portable Mist Fume Dust Collector

3 Available

Units do not have arm and tube or casters.

Wired for 440-480 volt, 3 Phase

Factory specs:

Features & Benefits

Complete, Self-contained Unit: Versatile, easy to use; no installation required.
10-ft. E-Z Arm® High Flow Extractor: Self supporting external arm provides for maximum performance, reduces operator fatigue.
Efficient Source Capture:95%+ filtration efficiency produces cleaner air; system simplifies OSGA and insurance compliance.
Direct-drive Blower: Higher static pressure, longer filter life and greater reliability; non-sparking; no belts or pulleys to replace.
Non-electrostatic Operation: High reliability, low maintenance.
Narrow Width Design: Permits access and maneuverability in tight spaces.

Diversi-Tech FRED Fume Mist Dust Collector

Posted on by Dev

These are the specifications I found on the internet. The should be right, so you may want to double check them.

Diversi-Tech FRED Mist Dust Fume Collector (2 Available)

Year 1995

8″ Diameter Dirty Air Inlet
Rated Inlet Capacity: 800 CFM with 6-1/2″ Diameter Pipe
Dirty Air is Drawn in at the Base of the Unit and is Exhausted Out the Top
Filter #1, Polyester Pre-Filter 24″ x 24″ x 2″ Disposable
Filter #2, Aluminum Mesh 24″ x 24″ x 1″ Washable
Filter #3, Polypropylene Weave 24″ x 24″ x 4″ Washable
Filter #4, 12″ Deep 95% Drop Rigid Cell Filter 24″ x 24″ x 12″ Washable
Filter #5, 2″ Carbon Impregnated Pleated Polyester 24″ x 24″ x 2″ Disposable
Filter #6, Optional Hepa Filter Disposable
1-1/2 HP, 3 Phase Motor, Wired for 460v
Overall Size: 32″ x 29″ x 72″ High

600 Ton Bliss Straight-Side Press For Sale

Posted on by Dev

600 Ton Bliss Straight-Side Press For Sale

Model: SE2-600-120-60
Year: 1978
Capacity: 600 Ton
Bed Area: 120″ x 60″
Slide Area: 120″ x 60″
Stroke: 18″
Die Height: 34″
Adj: 16″
Speed: 20 SPM
Equipped with: T-Slotted Bolster

Click Here For Updates on Machines & Equipment As They Become Available

Monarch Metal Lathe Model No. 61

Posted on by Dev

Monarch Metal Lathe Model No. 61

Lathe: 13×30
Type: Tool Makers
Serial: 43667
Date of Mfg: 2-59
Model No. 61
Weight: 5145

Monarch Metal Lathe – 72″ Between Centers

Posted on by Dev

Monarch Metal Lathe – 72″ Between Centers

Tag reads:
Catalog size: 20″
Serial: 41551
Actual swing: 22.5″
Distance between centers: 72″
Year: 1956

We did a little looking and have found these specs from other sources for the Monarch lathe. These specs are to the best of our knowledge……that being said, you will want to double check the info using the serial number or physical inspection.