• Year: 1999
• Model: SL-250BSMC/500
• Run Time: 14,550 hours
• Swing Over Bed / Cross Slide:  26.8″/ 22.6″
• Maximum Turning Diameter: 15.3″
• Standard Turning Diameter: 8.27”
• Distance Between Centers: 22.6″
• Max Turning Length: 19.10″
• Spindle Speeds: 35-3500
• Spindle Motor:  20/15
• Spindle Nose: A2-8
• Min. Spindle Index Angle: .001”
• Spindle Bore:  3.3″
• Max Bar Size:  2.9″
• Turret Stations: 10
• Turret Index Time:  0.2 Sec
• Square Tool Capacity: 1″
• Boring Bar Capacity: 2.0″
• Axis Travel:
  • Z- Axis:  19.5″
  • X- Axis:  6.3″
• Live Milling: 10 Positions
• Live Milling RPM: 3,000RPM
• Live Milling HP: 8/5.8 HP
• Rapid Travels: X and Z : 708/944.9 IPM
• Tail Stock Taper: MT # 5
• Tail Stock Travel: 4.7”
• Machine Dimensions: 93.7″ x 69.3″ x 74.2″ high
• Power: 220v/3ph

Equipped With:

• MORI SEIKI-Fanuc MSC-501 (Fanuc 18i) CNC CONTROL
• RS-232C PORT INTERFACE FOR DNC OPERATION
• IN-MACHINE TOOL PRE-SETTER
• TAILSTOCK
• 20 HP SPINDLE
• STANDARD COOLANT SYSTEM WITH TANK & PUMP
• MAYFRAN CHIP CONVEYOR
• COLLET CHUCK INCLUDED (WITH SOME COLLETS)

Note:

• Does Not Include Bar Feeder
• Machine was recently removed from service on 2.10.17 and runs good

• Model: HAWK40/SSM
• Year: 1999
• 3 Phase 230v

Click Here For Updates on Machines & Equipment As They Become Available

Table Size 36″ x 14”

X Axis Travel 30”

Y Axis Travel 16″

Z Axis Travel 22″

Automatic Tool Changer 20 Stations

Spindle Taper Cat 40 Taper

Spindle Speed in RPMS 0- 15,000 RPM

Spindle Motor 20 HP

Spindle Time 21,707 Hours

Year 2000

Click Here For Updates on Machines & Equipment As They Become Available

]]> 7700 http://affordable-machinery.com/metal-working-machinery/cnc-machining-and-turning-centers/used-haas-vf3-cnc-mill-sale/ Thu, 12 May 2016 14:27:24 +0000 http://affordable-machinery.com/?p=7578 Continue reading →]]> Used Haas VF3 CNC Mill For Sale

• Year: 1995
• Model: 3
• Table: 48″ x 18″
• X Axis Travel: 40″
• Y Axis Travel: 20″
• Z Axis Travel: 25″
• Voltage: 208/230

Click Here For Updates on Machines & Equipment As They Become Available
Used Plastic Machinery Updates! Click Here..

Vices & Fixtures not included

• Model: 907-1 – VMC6030HT
• Table: 62.5″ x 30″
• Voltage: 230
• X Axis Travel 60″
• Y Axis Travel 30″
• Z Axis Travel 30″

Click Here For Updates on Machines & Equipment As They Become Available
Used Plastic Machinery Updates! Click Here..

Click Here For Updates on Machines & Equipment As They Become Available
Used Plastic Machinery Updates! Click Here..

www.Affordable-Machinery.com or Call 616-200-4308

• Press Capacity: 33 Tons
• Max Sheet Size: 50″ x 157.48″
• Max. Sheet thickness: 0.126″
• Max. Sheet weight: 110 lbs
• X-Axis travel: 78″
• Y-Axis travel: 50″
• Throat Depth: 50″
• Air supply: 8.8 ft3/min
• Width: 203.5″ Depth: 162.2″ Height: 96.5″
• Weight: 17.6 tons
• Equipped With Fanuc 18-PC Control Large Quantity of Tooling – Type of tooling Thick Turret Capacity; 58 stations (4 auto-index) Turret conf. 1/2″:24, 1 1/4″:24, 2″:4, 3 1/2″:2 Auto Index 1 1/4″:2, 4 1/2:2 Sheet address at loading Front Automatic sheet repositioning Serial No: 35840238 Year Mfg. 2000

Click Here For Updates on Machines & Equipment As They Become Available

Amada Model Vipros 358 King II CNC Turret Punch For Sale