22,000lb Taylor Forklift For Sale (counter weighted for 30,000lbs)

22,000lb Taylor Forklift For Sale

We got this machine in trade and the previous owner counter-weighted for more capacity.  They said it will pick 30,000lbs, but we are selling it as a 22,000lb capacity. The machine runs well, however it is nearly 40 years old and will have the typical small leaks.  Feel free to come check it out in person.

  • Capacity 22,000lbs (counter-weighted to 30,000lbs)
  • Year 1975
  • Serial S-26-11792
  • Engine: Ford Industrial Straight 6
  • Fuel: Propane
  • Fork Length: 7′
  • Overall Length of Truck with Forks: 20′ 7″
  • Overall Width of Truck: 10′ 2″
  • Lifts: 109″
  • New Paint
  • Runs good

taylor forklift 22000lb for sale 12 taylor forklift 22000lb for sale 11 taylor forklift 22000lb for sale 10 taylor forklift 22000lb for sale 8 taylor forklift 22000lb for sale 9 taylor forklift 22000lb for sale 8 taylor forklift 22000lb for sale 7 taylor forklift 22000lb for sale 6 taylor forklift 22000lb for sale 5 taylor forklift 22000lb for sale 4 taylor forklift 22000lb for sale 4 taylor forklift 22000lb for sale 3 taylor forklift 22000lb for sale 2

taylor forklift 22000lb for sale

taylor forklift 22000lb for sale

80,000lb Bristol Forklift with Boom For Sale – Rigger Special

80,000lb Capacity Bristol Forklift For Sale

– Truck is in very good condition
– Year: 1999 (we think, checking on this)
– Engine: Cummins Diesel
– Forks: 8’
– Overall Length w/o Forks: 14’
– Overall Width: 96”
– Lowered Mast Height: 108”
– Lifts: 8’
– New Paint

Equipped with: Boom, Air Brakes, Pneumatic Tires

Bristol 80000lb Forklift 3 Bristol 80000lb Forklift 4 Bristol 80000lb Forklift 5 Bristol 80000lb Forklift serial a Bristol 80000lb Forklift serial b Bristol 80000lb Forklift 1 Bristol 80000lb Forklift 2

Mori Seiki ZL-25MC/500 Dual Turret CNC Lathe Turning Center

We bought this from a manufacture we work with regularly.  It was used in regular production, however the electronics will need to be serviced.  An electrical board in the cabinet broke off in shipping to our warehouse.  The specs below are to the best of my knowledge and you may want to double check them.

Mori Seiki CNC Lathe Turning Center – Dual Turret
Year 1988
Between Centers 19.6″
Swing over cross slide 13.8″
Spindle Speed 35-3,500RPM
Hole Through Spindle: 3.1″
Bar Capacity 2.5″
No. of Tools: Upper 12, Lower 8
Spindle: A2-6
Horsepower (30 Min.): 30HP
Dia. of Quill in Tailstock: 3.3″
Tailstock Quill Taper #3MT
Equiped with:
Fanuc CNC Control
12 Station Upper Turret
8 Station Lower Turret
Live Tailstock
Chip Conveyor

INCLUDES; 4 Live Tool Holders, Upper turret motor cover is included and shown in one of the pictures, we also had the back panel off for pictures, the back panel is included
DSCN3738 DSCN3739 DSCN3740 DSCN3741 DSCN3742       pic 1 pic 2 pic 3 pic 4 pic 5DSC05103 DSC05105 DSC05106 DSC05113 DSC05104

Geka Dual-Cylinder Hydraulic Ironworker

Geka Dual-Cylinder Hydraulic Ironworker
  • ·         Model : HYD100SD
  • ·         Punch Capacity : 100 tons
  • ·         Maximun Punching Size : 1-3/16″ Hole in 1″
  • ·         Plate Shear : 24″ X 5/8″
  • ·         Rounds : 2″
  • ·         Square : 2″
  • ·         Notching : 10″ X 10″ X 1/4″
  • ·         Throat Depth : 12″
  • ·         Strokes/Minute : 17
  • ·         Main Motor HP : 7.5
  • ·         Dual Foot Switches
  • ·         Dual Cylinder

Image00024 Image00023 Image00022 Image00021 Image00020 Image00019 Image00018

 

40,000lb Elwell Parker Electric Forklift For Sale

Elwell Parker Electric Forklift

  • Year 1986
  • Capacity 40,000lbs @ 30″ Load Center
  • Mast Lowered 113″
  • Lifts 115″
  • Free Lift 58″
  • Forks 84″ with side shift & fork positioner
  • 72 volts with two good 36 volt batteries and chargers
  • Total length front to back not including forks 151″
  • Total width 73″
  • Height 117″

EC400-472-3 (1) EC400-472-2 (1) EC400-472-1 (1)

 

Hydroflow 12A Coolant Filtration System

Hydroflow 12A Coolant Filtration System

Grinding and Machining
• Creep Feed and CBN grinding
• All types of alloys
• Filtering light oils or
water-soluble coolants
Rolled Media Vacuum Filter
Flow rates from 60 to 180 GPM filtration to 8-10 microns
*Based on standard flux rates of 5 to15 GPM/sq.ft.
Lower or higher flux rates can be used for special applications.
Features:
• Restrictive solids by-pass vacuum design
• Smooth proprietary conveyor system
• Automated coolant make-up system
• Rugged construction
• Coolant delivery systems

  • Media Width 39″
  • Filter Area 12sqft
  • Total Capacity 600 gallons
  • Flow Range 60-180 GPM

* see specs on tag

Image00001 Image00002 Image00004 Image00006 Image00007