Author Archives: Dev

Diversi-Tech FRED Fume Mist Dust Collector

Posted on by
These are the specifications I found on the internet.  The should be right, so you may want to double check them.
 
Diversi-Tech FRED Mist Dust Fume Collector (2 Available)
Year 1995

8″ Diameter Dirty Air Inlet
Rated Inlet Capacity:  800 CFM with 6-1/2″ Diameter Pipe
Dirty Air is Drawn in at the Base of the Unit and is Exhausted Out the Top
Filter #1, Polyester Pre-Filter 24″ x 24″ x 2″ Disposable
Filter #2, Aluminum Mesh 24″ x 24″ x 1″ Washable
Filter #3, Polypropylene Weave 24″ x 24″ x 4″ Washable
Filter #4, 12″ Deep 95% Drop Rigid Cell Filter  24″ x 24″ x 12″ Washable
Filter #5, 2″ Carbon Impregnated Pleated Polyester 24″ x 24″ x 2″ Disposable
Filter #6, Optional Hepa Filter Disposable
1-1/2 HP, 3 Phase Motor, Wired for 460v
Overall Size: 32″ x 29″ x 72″ High

photo 2(1) photo 1(2)

Monarch Metal Lathe – 72″ Between Centers

Posted on by

Monarch Metal Lathe – 72″ Between Centers

  • Tag reads:
  • Catalog size: 20″
  • Serial: 41551
  • Actual swing: 22.5″
  • Distance between centers: 72″
  • Year: 1956
We did a little looking and have found these specs from other sources for the Monarch lathe.  These specs are to the best of our knowledge……that being said, you will want to double check the info using the serial number or physical inspection.

Machine Details:

  • MODEL ………………………… 20CM
  • SWING OVER WAYS ……………….. 22-1/2″
  • DISTANCE BETWEEN CENTER ………… 72″
  • SWING OVER CROSS SLIDE …………. 13″
  • SPINDLE SPEEDS ………………… (12) 9 TO 400 RPM
  • FEEDS ………………………… (48) .005 TO .240 IPR
  • THREADS ………………………. (48) 3/4 TO 46 TPI
  • DIAMETER OF SPINDLE HOLE ……….. 2-1/4″”
  • TAPER ATTACHMENT ………………. YES
  • SWIVEL COMPOUND ……………….. YES
  • THREAD DIAL …………………… YES
  • HARDEN WAYS …………………… YES
  • SPINDLE FORWARD & REVERSE ………. YES
  • COOLANT WITH CHIP PANS …………. YES
  • MOTOR ………………………… 10 HORSEPOWER

Monarch Metal Lathe 1 20140626_152932 20140626_152911 20140626_152853 20140626_152842Monarch Metal Lathe 2 Monarch Metal Lathe 3 Monarch Metal Lathe 4

 

Moore Jig Grinder No 3

Posted on by

Moore Jig Grinder No 3

  • Serial Number G1376
  • Machine was rebuilt at a cost of $40,000 with very little use since rebuild — excellent condition

Moore Jig Grinder No. 3 1 Moore Jig Grinder No. 3 2 Moore Jig Grinder No. 3 3 Moore Jig Grinder No. 3 4 Moore Jig Grinder No. 3 5 Moore Jig Grinder No. 3 6 Moore Jig Grinder No. 3 720140627_10214820140627_10132120140627_101240

4,500 Ton Verson Transfer Press For Sale – SOLD- CALL FOR UPDATES

Posted on by

4,500 Ton Verson Transfer Press For Sale

  • Model: TL-SE8-3000-1500-216-216-120T
  •  
  • Capacity: 4,500T – @ 8″ SPM @ 1/2″ Up
  •  
  • Capacity of Right Hand Slide: 3,000T
  •  
  • Capacity of Left Hand Slide: 1,500T
  •  
  • Stroke of Both Slides: 40″
  •  
  • Power Adj. of Both Slides: 2″
  •  
  • Speed: 8-18 SPM
  •  
  • Equipped with: Micro Inch Drive
  •  
  • Total Weight of Press: 4,190,000lbs.

30,000lbs. Rico Electric Forklift For Sale

Posted on by

30,000lbs. Rico Forklift For Sale

  •  Year: 2003
  • Capacity: 30,000lbs. @ 30″ Load Center
  • Model: P300
  • Serial: R12668
  • Mast: 120″ Lowered, Lifts up to 117″
  • Hours: 9,489
  • NO FREE LIFT
  • 72″ Forks with Side Shift and Fork Positioner
  • 72 Volt with Good Batteries and Chargers
  • Total Length: 136″ (Not Including Forks) x 63″ Wide x 120″ Tall-Mast
  • Total Weight: 48,000lbs. (with Batteries)

30,000lbs. Rico Forklift (1)

electric 30000 forklift for sale